Your Windscape® display is ultra quick to set up. Backwalls, the tower and the hanging ring are inflated in the same way - with a push of a button.
1) Unpack 2) Inflate 3) Add feet (when needed) 4) Ready!
Download set up instruction (pdf) »
This is how easy it is, watch set up movie:
How to add feet, watch set up movie:
How to deflate/dismantle:
Inflator
The inflator shuts off automatically at the proper inflation (11psi). It is used both to inflate and deflate your WindScape® display. Just place the hose in different positions on the inflator, as shown below:
Inflator info:
The AC Power Transformer:
Input: AC100-240V 50/60 Hz
Output: 12V, 22 amps
How it works - frame and fabric graphic
There is an inner frame that is air-filled by the inflator and your graphic is stretched to a smooth surface. Your fabric graphic is pre-installed when delivered and is not removed during set up and dismantle. You just open your graphic with a zipper to inflate and deflate the frame.
Fabric graphic: Dye sub stretch fabric.
Download the WindScape® product certificate »
Any questions? Contact us at +46 8 55696900 or info@expandmedia.com. For our UK customers: info.uk@expandmedia.com or +44 208 540 8800.